diesel fuel additives for making methanol diesel
Introduction of methanol diesel:
1. Methanol diesel is a newly developed fuel oil for motor
vehicles. It is composed by methanol, diesel and relevant
2. This kind of fuel has high power, because the additives we
offered could increase the thermal efficiency of diesel.
You could also use this kind fuel under cold conditions, cause the
freezing point of it is reduced.
3. When you using this kind diesel, the emissions would be greatly
reduced. Thus it is a quite environment friendly
product. Also it could be stored for more than 3 months if the
water included does not exceed the relevant standard
under ambient temperature.
4. Methanol diesel could be used whether separately or mix with
other fuel oil.
Definition of our methanol diesel additives:
Our additives is the auxiliary agents for mixing methanol with
diesel equably. It is quite essential during the process of
making methanol diesel. The thermal efficiency of methanol diesel
would be easily improved.
Technical data of methanol diesel additives:
light yellow transparent liquid without any smell
0.86-0.88 g per cubic centimeter
less than 10 ppm
less than -5 Celsius degrees
no less than 50 Celsius degrees
less than 1%
Steps for making methanol diesel:
1. Firstly take 20% of methanol together with 20% of Tiande brand
methanol diesel additives according to volumetric
weight. And then get them evenly mixed until you get clear and
transparent semifinal product denatured methanol;
2. Then put 40% of denatured methanol into 60% of diesel according
to volumetric weight. Blend the mixture evenly
until it turns into clear and transparent finished product methanol